Buffalo Kuro-box Pro
From TechInfoDepot
Revision as of 01:42, 9 September 2022 by ShadowBot (talk | contribs) (→top: clean up, replaced: 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, |802dot11_protocols =none → |802dot11_protocols = none)
| Single Disk NAS Enclosure | |
|
| |
| Wikipedia | |
|---|---|
| WikiDevi.wi-cat.ru | |
| 3rd Party Firmware | |
| dd-wrt | |
| OpenWrt |
Status Unknown |
| Tomato any flavor |
Incompatible |
| Gargoyle |
Status Unknown |
| Platform | |
| Brand • Model • Rev |
Buffalo Kuro-box Pro |
| Type |
NAS |
| CPU1 |
Marvell 88F5182 |
| CPU1 Speed |
400 MHz |
| Flash1 Chip |
STMicro NAND02GW3B2CN6 |
| Flash1 Size |
256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> |
| Flash2 Chip |
SST 39VF020 |
| Flash2 Size |
0.256 MiB268,435.456 B <br />2,097.152 Kib <br />262.144 KiB <br />2.048 Mib <br />2.5e-4 GiB <br /> |
| RAM1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Chip |
Elpida E5116ANSE x 2 |
| ETH chip1 |
Marvell 88F5182 |
| ETH chip2 |
Marvell 88E1118R |
| Ethernet Port Count |
1-1GbE-LAN |
| Stock bootloader |
U-Boot 1.1.1 Marvell 1.12.1 TINY |
| Stock FW OS |
Linux 2.6.12-6-arm1 |
| Expansion IF types |
USB 2.0, SATA, PCIe |
| Mini PCIe slots |
1 |
| USB ports |
2 |
| SATA Ports |
2 |
| USB Hub Compatible |
Untested |
| Power |
120 VAC ~ 60 Hz, ? A |
| Connector type |
C7 |
| Serial Port (UART) |
yes, 3.3V TTL, 4-pin header, (115200 8N1) |
| JTAG Port |
yes |
| Flags |
RTC w/ battery backup, fan |
|
Additional chips | |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
192.168.11.150 |
| Default login user |
root |
| Default login password |
kuroadmin |
| 3rd Party Firmware Support | |
| Retail | |
| UPC |
4981254582268 (UPC DB, On eBay) |
| ASIN |
B000VZWWXW |
| Country of manuf | Japan |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
Overview
- Main board silkscreened with "MADE IN JAPAN" and "MVLS2EG-CA"
- PCIe and SATA ports are on sub-board silkscreened with "LSGLSUB-CA" and "MADE IN CHINA"
Links of Interest
Buffalo Wiki alternative firmware
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (June 2020) |
Reverting
This section is empty. You can help by adding to it. (June 2020) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (June 2020) |
USB Info
This section is empty. You can help by adding to it. (June 2020) |
vlan Info
This section is empty. You can help by adding to it. (June 2020) |
Pictures
This section is empty. You can help by adding to it. (June 2020) |
Notes
This section is empty. You can help by adding to it. (June 2020) |
Hardware Modification
This section is empty. You can help by adding to it. (June 2020) |
See also
This section is empty. You can help by adding to it. (June 2020) |