Belkin F7D7602 v2
From TechInfoDepot
Jump to navigationJump to searchbgn | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NetCam HD+ | |||||||||||||
|
| |||||||||||||
| Wikipedia | |||||||||||||
| WikiDevi.wi-cat.ru | |||||||||||||
| Platform | |||||||||||||
| Brand • Model • Rev |
Belkin F7D7602 v2 | ||||||||||||
| FCC ID | |||||||||||||
| IC ID | |||||||||||||
| Type |
camera | ||||||||||||
| Wireless class |
N300 | ||||||||||||
| CPU1 | |||||||||||||
| Flash1 Chip |
Winbond Model? | ||||||||||||
| Flash1 Size |
? MiB | ||||||||||||
| RAM1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> | ||||||||||||
| RAM1 Type |
DDR2 | ||||||||||||
| RAM1 Chip |
Brand? 64X16DDR2 | ||||||||||||
| Expansion IF types |
none specified | ||||||||||||
| Power |
5 VDC, 1 A | ||||||||||||
| Connector type |
barrel | ||||||||||||
| Serial Port (UART) |
yes, unpopulated, 4-pin header, internal, 3.3V TTL | ||||||||||||
| Categorized as |
not categorized | ||||||||||||
| Other | |||||||||||||
| Default IP address |
???.???.???.??? | ||||||||||||
| Default SSID |
NetCamHDXXXX | ||||||||||||
| Retail | |||||||||||||
| FCC approval date | 12 February 2014 | ||||||||||||
| Country of manuf | China | ||||||||||||
| Radio 1 | |||||||||||||
| Chip1 | |||||||||||||
| Wireless interface OUI |
EC:1A:59 | ||||||||||||
| Antenna Connector Type |
none specified | ||||||||||||
| MIMO status |
2x2:2 | ||||||||||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||||||||||
| 802.11n |
up to 300 Mbps | ||||||||||||
| 802.11g |
up to 54 Mbps | ||||||||||||
| 802.11b |
up to 11 Mbps | ||||||||||||
| WiFi Operating Frequency |
2.4 GHz | ||||||||||||
| |||||||||||||
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
Overview
"75076230", "2013-09-17", and "REV A3" is silkscreened on the board in the FCC photos.
Also per the FCC photos, this device is using...
- the MT7620A WiSoC
- a Winbond' Flash chip
- an AIT AIT8433T multimedia processor
- a Nuvoton NAU8810YG mono audio codec
Per the FCC label and the example label in the external photos...
- the device has a default setup SSID pattern of NetCamHDXXXX (where XXXX appears to be the last 4 digits of the wireless interface MAC [upper case letters])
- a EC:1A:59 OUI is shown
Probable used PSU(s)
The power supply shown used in the FCC external photos is a Belkin-branded DVE DSA-5PFE-05 FUS 050100.
| DVE DSA-5PFE-05 FUS 050100 (more) | |||||
|---|---|---|---|---|---|
| Input: 100-240 VAC ~ 50/60 Hz, 0.2 A | |||||
| Input connector: NEMA 1-15P Style: small, horiz. Eff. level: 3 | |||||
| Output: 5 VDC, 1 A | |||||
| Output connector: barrel (center +) OD: ?? ID: ?? LEN: ?? | |||||
Links of Interest
This section is empty. You can help by adding to it. (May 2020) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (May 2020) |
Reverting
This section is empty. You can help by adding to it. (May 2020) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (May 2020) |
USB Info
This section is empty. You can help by adding to it. (May 2020) |
vlan Info
This section is empty. You can help by adding to it. (May 2020) |
Pictures
This section is empty. You can help by adding to it. (May 2020) |
Notes
This section is empty. You can help by adding to it. (May 2020) |
Hardware Modification
This section is empty. You can help by adding to it. (May 2020) |
See also
This section is empty. You can help by adding to it. (May 2020) |