Banana Pi BPI R2

From TechInfoDepot
Revision as of 11:55, 17 July 2022 by ShadowBot (talk | contribs) (→‎top: clean up, replaced: 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, |802dot11_protocols =a → |802dot11_protocols = a)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
multiple revisions of this device, use caution
abgn
Development Board
Banana Pi BPI R2.jpg
Homepage
WikiDevi.wi-cat.ru
3rd Party Firmware
dd-wrt
Status Unknown
OpenWrt
Status Unknown
Tomato any flavor
Incompatible
Gargoyle
Status Unknown
Platform
BrandModelRev
Banana Pi BPIR2 (v1.2)
FCC ID
none specified
Type
single-board computer, wireless router
Wireless class
AN600
CPU1
MediaTek MT7623N
CPU1 Speed
1.3 GHz   ( 4 cores )
Flash1 Chip
Samsung KLM8G1WEPD-B031
Flash1 Size
8 GiB 8,192 MiB <br />8,589,934,592 B <br />67,108,864 Kib <br />8,388,608 KiB <br />65,536 Mib <br />
Flash2 Chip
SST 25VF512A
Flash2 Size
512 KiB 0.5 MiB <br />524,288 B <br />4,096 Kib <br />4 Mib <br />4.882812e-4 GiB <br />
RAM1 Size
2 GiB 2,048 MiB <br />2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br />
RAM1 Chip
SK hynix H5TQ4G83AFR-PBC x 4
ETH chip1
MediaTek MT7623N
Switch
MediaTek MT7530WU
Ethernet Port Count
1-1GbE-WAN
4-1GbE-LAN

802dot11 OUI: none specified

Stock bootloader
U-Boot
Stock FW OS
Bananian
Expansion IF types
Mini PCIe, USB 3.0, USB 2.0, SATA 3.0
Mini PCIe slots
1
USB ports
3
SATA Ports
2
USB Hub Compatible
Untested
Power
12 VDC, 2 A
Connector type
barrel
5.5 mm (OD)
2.1 mm (ID)
Serial Port (UART)
yes, 3.3V TTL, 3-pin header, populated, (115200 8N1)
Flags
Bluetooth 4.1 BLE, HDMI out, MIPI DSI, MicroSD Card slot, IR receiver, GPIO, SPI, I2C

Additional chips
PMIC;MediaTek;MT6323L;;1;
Power Distribution Switch (USB 3.0);TI;TPS2553;;1;
Sink/Source DDR Termination Regulator;TI;TPS51200;;1;
PCIe 2.0 to SATA 6Gbps Controller;Asmedia;ASM1061;;1;
18V, 5A Synchronous Step-Down Converter;Richtek;;2;
2-Bit 20 Mb/s Dual-Supply Level Translator; ON Semi;NLSX4373;;1;
3A Ultra Low Dropout Linear Regulator;ANPEC;APL5932A;;3;
18V, 5.5A Synchronous Step-Down Converter;Richtek;;1;

Categorized as
not categorized
Other
Default IP address
???.???.???.???
Manuf/OEM/ODM
3rd Party Firmware Support
Android, Ubuntu, Debian, OpenWrt • (List | Dev | DLs)
Retail
(Est.) release date August 2017
ASIN B078HG62ZT Flag of the United States.svg
Country of manuf China
Radio 1
Chip1
MediaTek MT6625L
Wireless interface OUI
none specified
Antenna Connector Type
U.FL
MIMO status
2x2:2
Wireless Standard
IEEE 802.11a/b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
802.11a
up to 54 Mbps
WiFi Operating Frequency
2.4 or 5 GHz
 CPU1 brandRadio1 chip1 brandRadio1 chip2 brand
Banana Pi BPI M1Allwinner
Banana Pi BPI M2AllwinnerBroadcom
Banana Pi BPI M2 BerryAllwinnerBroadcom
Banana Pi BPI M2 UltraAllwinnerBroadcom
Banana Pi BPI M2 ZeroAllwinnerBroadcom
… further results

For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.

Overview

Links of Interest

News

Flashing

Upgrading

Reverting

JTAG-Serial Info

USB Info

vlan Info

Pictures

Notes

Specifications

Banana Pi RPI R2 Board
  • CPU: MediaTek MT7623N Quad-Core ARM Cortex-A7 @1.3GHz
  • Memory: 2GB DDR3 (shared with GPU); GPU: Mali-450 MP4
  • Storage: MicroSD (TF) Card, SATA 6Gbps, eMMC
  • Network: 5x 10/100/1000Mbps Ethernet (MT7530)
  • WLAN: 802.11abgn 2.4/5GHz (MT6625L), BT 4.1 BLE
  • Video In: CSI input for video cameras, Out: HDMI
  • Audio In: I2S; Audio Out: HDMI, I2S audio
  • USB Ports: 2x USB 3.0 host, 1x USB 2.0 OTG
  • GPIO: 40-pins header, 28x GPIO, UART,I2C,SPI,PWM,I2S
  • Buttons: Reset button, Power button, U-Boot button
  • LED: Red, Green, Blue
  • OS: Android, Ubuntu, Debian, Bananian
  • Power Source: 12V/2A via DC power
  • Dimensions: 148mm × 100mm
  • Weight: 100g

Hardware Modification

See also