Axesstel MV430i
| 3G / CDMA2000 Wireless Broadband Gateway | |
|
| |
| WikiDevi.wi-cat.ru | |
|---|---|
| Platform | |
| Brand • Model • Rev |
Axesstel MV430i |
| Type |
3G gateway |
| CPU1 |
Micrel KSZ8695PI |
| CPU2 |
Qualcomm MSM6800A |
| Flash1 Chip |
Eon EN29LV320AB-70TIP |
| Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
| Flash2 Chip |
SK hynix HYC0SEH0A-F3P-5S60E |
| RAM1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Chip |
ISSI IS42S32800B-7TLI |
| RAM2 Chip |
SK hynix HYC0SEH0A-F3P-5S60E |
| ETH chip1 |
Micrel KSZ8695PI |
| Switch |
Micrel KSZ8695PI |
| Ethernet Port Count |
4-100MbE-LAN |
| Expansion IF types |
none specified |
| Power |
12 VDC, 2 A |
| Connector type |
barrel |
|
Flags: 3G (CDMA) | |
|
Additional chips | |
| Other | |
|
Default IP address: 192.168.0.1 | |
| Retail | |
| FCC approval date | 28 August 2008 |
| ASIN |
B004QZOQ1O |
| Country of manuf | China |
For a list of all currently documented Micrel (Kendin) chipsets with specifications, see Micrel.
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
Overview
"MV440 MV3.1", "06. 26. 2008.", and "7020MV440311"
- is silkscreened on the top and bottom of the board.
Appears to be same board as MV440 without miniPCI populated.
The Axesstel MV400 3G gateways series, including the models:
- MV410 (450MHz), MV420 (800MHz), MV430 (1900MHz) and MV440 (800/1900MHz),
- combines CDMA2000 1x EV-DO Rev A wireless wide area networking (WWAN), a
- Wi-Fi wireless local area networking (WLAN) router, and a four port Ethernet switch.
Additional features of the Axesstel MV400 series 3G gateways include:
- Compatibility with other LAN and WLAN networking devices to further expand device networking capability
- Two Wi-Fi antennas and two receive diversity antennas to maximize data throughput and network accessibility
- An optional back-up battery enables wire-free use in any room and ensures uninterrupted data connectivity
- Six LEDs indicate power, signal, connection, 1x EV-DO mode, Ethernet and Wi-Fi status
Links of Interest
This section is empty. You can help by adding to it. (February 2021) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (February 2021) |
Reverting
This section is empty. You can help by adding to it. (February 2021) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (February 2021) |
USB Info
This section is empty. You can help by adding to it. (February 2021) |
vlan Info
This section is empty. You can help by adding to it. (February 2021) |
Pictures
Notes
This section is empty. You can help by adding to it. (February 2021) |
Hardware Modification
This section is empty. You can help by adding to it. (February 2021) |
See also
This section is empty. You can help by adding to it. (February 2021) |