Askey RTW020
From TechInfoDepot
Revision as of 16:17, 5 September 2022 by ShadowBot (talk | contribs) (→top: clean up, replaced: 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, |802dot11_protocols =b → |802dot11_protocols = b)
b | |
|---|---|
| access point | |
| WikiDevi.wi-cat.ru | |
| Platform | |
| Brand • Model • Rev |
Askey RTW020 |
| FCC ID | |
| Type |
access point |
| Wireless class |
B11 |
| CPU1 |
Atmel AT76C510 |
| Flash1 Chip |
Atmel Model? |
| Flash1 Size |
? MiB |
| RAM1 Size |
? MiB |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 |
Atmel AT76C510 |
| ETH chip2 |
LSI Model? |
|
802dot11 OUI: none specified | |
| Expansion IF types |
none specified |
| Power |
5 VDC, 2 A |
| Connector type |
barrel |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
192.168.100.1 |
| Default SSID |
IEEE 802.11 LAN |
| Retail | |
| FCC approval date | 10 August 2001 |
| Radio 1 | |
| Chip1 |
Atmel AT76C510 |
| Chip2 |
Intersil Model? |
| Chip3 |
Intersil Model? |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| Wireless Standard |
IEEE 802.11b |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Atmel chipsets with specifications, see Atmel.
For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented LSI chipsets with specifications, see LSI.
Overview
There is no web configuration interface for this access point. Configuration is done through the use of a Windows utility bundled with the device.
Sold by Pheobe Micro as the PHWL11-AP.
Default credentials are from Phoebe Micro's manual for the PHWL11-AP. The manual also states there is a read only access password of public. The OUI commonly used by the item is probably 00:90:96 (most common for the SSID in WiGLE).
Links of Interest
This section is empty. You can help by adding to it. (November 2020) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (November 2020) |
Reverting
This section is empty. You can help by adding to it. (November 2020) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (November 2020) |
USB Info
This section is empty. You can help by adding to it. (November 2020) |
vlan Info
This section is empty. You can help by adding to it. (November 2020) |
Pictures
This section is empty. You can help by adding to it. (November 2020) |
Notes
This section is empty. You can help by adding to it. (November 2020) |
Hardware Modification
This section is empty. You can help by adding to it. (November 2020) |
See also
This section is empty. You can help by adding to it. (November 2020) |
Categories:
- Askey
- Embedded system/access point
- Embedded System Atmel
- Embedded System AT76C510
- Embedded System LSI
- Embedded System Intersil
- Embedded System IEEE 802.11b
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Atmel
- LSI
- Intersil
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation