Askey CHE106W-D17
From TechInfoDepot
Revision as of 16:16, 5 September 2022 by ShadowBot (talk | contribs) (→top: clean up, replaced: 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, |802dot11_protocols =b → |802dot11_protocols = b)
b | |
|---|---|
| access point,cable modem | |
| WikiDevi.wi-cat.ru | |
| Platform | |
| Brand • Model • Rev |
Askey CHE106W-D17 |
| FCC ID | |
| Type |
access point, cable modem |
| Wireless class |
B11 |
| CPU1 |
Broadcom BCM3348 |
| CPU1 Speed |
200 MHz |
| Flash1 Chip |
Intel E28F320J3A110 |
| Flash1 Size |
4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> |
| RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Chip |
SK hynix HY57V281620HCT-H |
| ETH chip1 |
Broadcom BCM3348 |
| Ethernet Port Count |
1-100MbE-LAN |
|
802dot11 OUI: none specified | |
| Expansion IF types |
none specified |
| Power |
12 VDC, 1 A |
| Connector type |
barrel |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
???.???.???.??? |
| Retail | |
| Availability | End of Life |
| FCC approval date | 18 August 2003 |
| Radio 1 | |
| Chip1 |
Broadcom BCM4301 |
| Chip2 |
Broadcom BCM2051 |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
U.FL |
| Wireless Standard |
IEEE 802.11b |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Overview
"3038-000161" and "CHE106W-D17(CH)-0E" appears to be silkscreened on the board in the FCC photos.
The FCC documents (and FCC ID) indicate that this device was used for some revision of the Scientific Atlanta WebSTAR DPR2320 (v1)
- (WebSTAR Cable Resident Gateway) • OEM: Askey CHE107W-D17
The default SSID may be wireless. The default IP may be 192.168.0.1.
- Possible 00:90:96 OUI
Links of Interest
This section is empty. You can help by adding to it. (November 2020) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (November 2020) |
Reverting
This section is empty. You can help by adding to it. (November 2020) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (November 2020) |
USB Info
This section is empty. You can help by adding to it. (November 2020) |
vlan Info
This section is empty. You can help by adding to it. (November 2020) |
Pictures
This section is empty. You can help by adding to it. (November 2020) |
Notes
This section is empty. You can help by adding to it. (November 2020) |
Hardware Modification
This section is empty. You can help by adding to it. (November 2020) |
See also
- Linksys WCG200 v1 • OEM: Askey CHE116W-D40
- Linksys BEFCMU10 v3 • OEM: Askey CME105-D40
Categories:
- Askey
- Embedded system/access point
- Embedded system/cable modem
- Embedded System Broadcom
- Embedded System BCM3348
- Embedded System BCM4301
- Embedded System BCM2051
- Embedded System IEEE 802.11b
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Broadcom
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation