Amped Wireless SR300

From TechInfoDepot
Revision as of 02:22, 9 August 2022 by ShadowBot (talk | contribs) (→‎top: clean up, replaced: |802dot11_protocols =bgn → |802dot11_protocols = bgn)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
bgn
High Power Wireless-300N Smart Repeater
Amped Wireless SR300.jpg
Homepage
Support
WikiDevi.wi-cat.ru
Platform
BrandModelRev
Amped Wireless SR300
FCC ID
IC ID
Type
repeater
Wireless class
N300
CPU1
Realtek Model?
Flash1 Chip
Brand? Model?
Flash1 Size
? MiB
RAM1 Size
? MiB
RAM1 Chip
Zentel Model?
ETH chip1
Switch
Ethernet Port Count
5-100MbE-LAN

802dot11 OUI: F8:78:8C (1 E, 2 W)
Ethernet OUI: F8:78:8C (1 E, 2 W)

Expansion IF types
none specified
Power
12 VDC, 1 A
Connector type
barrel
Categorized as
not categorized
Other
Default IP address
192.168.1.240
Default SSID
Amped_Wireless
Manuf/OEM/ODM
Retail
FCC approval date 18 April 2012
UPC 850214003010
(UPC DB, On eBay)
ASIN B004NBL9WK Flag of the United States.svg
Country of manuf Taiwan
Radio 1
Chip1
Realtek Model?
Wireless interface OUI
F8:78:8C
Antenna Connector Type
RP-SMA
MIMO status
2x2:2
Wireless Standard
IEEE 802.11b/g/n
802.11n
up to 300 Mbps
802.11g
up to 54 Mbps
802.11b
up to 11 Mbps
WiFi Operating Frequency
2.4 GHz

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

Overview

The device is presumed to use RTL8196C. It probably also uses RTL8192CE. "LPC0014 REV:2.2" is silkscreened on the board.

The default WPA key is wireless. The SSID is shown as lower case on the FCC photos.. but the manual (and WiGLE data) indicates that Amped and Wireless are capitalized.

OUI appears to be F8:78:8C (should probably be F8:7B:8C, and may be in some instances)

no FCC ID on a device label with this OUI...

Links of Interest

Flashing

Upgrading

Reverting

JTAG-Serial Info

USB Info

vlan Info

Pictures

Notes

Hardware Modification

See also