Amped Wireless RE1200EX
From TechInfoDepot
Jump to navigationJump to searchabgn+ac | |||||
|---|---|---|---|---|---|
| High Power AC1200 Pro Wi-Fi Range Extender | |||||
| WikiDevi.wi-cat.ru | |||||
| Platform | |||||
| Brand • Model • Rev |
Amped Wireless RE1200EX | ||||
| FCC ID | |||||
| IC ID | |||||
| Type |
range extender | ||||
| Wireless class |
AC1600 | ||||
| CPU1 |
Brand? Model? | ||||
| Flash1 Chip |
Brand? Model? | ||||
| Flash1 Size |
? MiB | ||||
| RAM1 Size |
? MiB | ||||
| RAM1 Chip |
Brand? Model? | ||||
| ETH chip1 |
Brand? Model? | ||||
| Ethernet Port Count |
2-1GbE-LAN | ||||
|
802dot11 OUI: none specified | |||||
| Expansion IF types |
none specified | ||||
| PoE |
non-standard (otherwise unspecified) | ||||
| Power |
? VDC, ? A | ||||
| Flags |
hg directional | ||||
| Categorized as |
not categorized | ||||
| Other | |||||
| Default IP address |
192.168.1.240 | ||||
| Default SSID |
Amped_RE1200EX_2.4, Amped_RE1200EX_5.0 | ||||
| Retail | |||||
| FCC approval date | 07 September 2018 | ||||
| Country of manuf | Taiwan | ||||
| Radio 1 | |||||
| Chip1 |
brand? model? | ||||
| Wireless interface OUI |
none specified | ||||
| Antenna Connector Type |
RP-SMA | ||||
| MIMO status |
2x2:2 | ||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||
| 802.11n |
up to 300 Mbps | ||||
| 802.11g |
up to 54 Mbps | ||||
| 802.11b |
up to 11 Mbps | ||||
| WiFi Operating Frequency |
2.4 GHz | ||||
| Radio 2 | |||||
| Chip1 |
brand? model? | ||||
| Wireless interface OUI |
none specified | ||||
| Antenna Connector Type |
RP-SMA | ||||
| MIMO status |
2x2:2 | ||||
| Wireless Standard |
IEEE 802.11a/n/ac | ||||
| 802.11ac |
up to 867 Mbps | ||||
| 802.11n |
up to 300 Mbps | ||||
| 802.11a |
up to 54 Mbps | ||||
| WiFi Operating Frequency |
5 GHz | ||||
| |||||
Overview
This device's FCC certification comes from a change in ID request from that of the Amped Wireless AP1200EX. Most details are copied from that page.
- Web GUI: http://setup.ampedwireless.com
Possibly Realtek based?
Links of Interest
This section is empty. You can help by adding to it. (October 2020) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (October 2020) |
Reverting
This section is empty. You can help by adding to it. (October 2020) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (October 2020) |
USB Info
This section is empty. You can help by adding to it. (October 2020) |
vlan Info
This section is empty. You can help by adding to it. (October 2020) |
Pictures
This section is empty. You can help by adding to it. (October 2020) |
Notes
This section is empty. You can help by adding to it. (October 2020) |
Hardware Modification
This section is empty. You can help by adding to it. (October 2020) |
See also
This section is empty. You can help by adding to it. (October 2020) |