Amped Wireless APA20
From TechInfoDepot
Jump to navigationJump to searchabgn+ac | |
|---|---|
| High Power 700mW Dual Band AC Wi-Fi Access Point | |
|
| |
| WikiDevi.wi-cat.ru | |
| Platform | |
| Brand • Model • Rev |
Amped Wireless APA20 |
| FCC ID | |
| IC ID | |
| Type |
access point |
| Wireless class |
AC1200 |
| CPU1 |
Realtek RTL8197D |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
? MiB |
| RAM1 Size |
? MiB |
| RAM1 Chip |
Nanya Model? |
| ETH chip1 |
Realtek RTL8197D |
| Switch |
Realtek RTL8367RB |
| Ethernet Port Count |
5-1GbE-LAN |
|
802dot11 OUI: none specified | |
| Expansion IF types |
USB 2.0 |
| USB ports |
1 |
| USB Hub Compatible |
Untested |
| Power |
12 VDC, 1.5 A |
| Connector type |
barrel |
| Flags |
high power |
|
Additional chips | |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
192.168.80.240 |
| Default SSID |
Amped_APA20_2.4, Amped_APA20_5.0 |
| Manuf/OEM/ODM | |
| Retail | |
| FCC approval date | 08 November 2013 |
| UPC |
850214003676 (UPC DB, On eBay) |
| ASIN |
B00FB465AO |
| Country of manuf | Taiwan |
| Radio 1 | |
| Chip1 |
Realtek RTL8812AR |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
RP-SMA |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11a/n/ac |
| 802.11ac |
up to 867 Mbps |
| 802.11n |
up to 300 Mbps |
| 802.11a |
up to 54 Mbps |
| WiFi Operating Frequency |
5 GHz |
| Radio 2 | |
| Chip1 |
Realtek RTL8192CE |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
RP-SMA |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
Overview
"LPCY0007 V1.6" and a date code of 1337 is silkscreened on the board in the FCC photos.
- The same text is found on the Amped Wireless RTA15 pictured in its FCC filing... which would appear to use the same photos for the device.
Data from the Amped Wireless RTA15's (some of which is per the TweakTown review noted there) entry has largely been copied onto this one..
Default settings are per the FCC label and manual.
- The default WPA PSK is specified as wireless.
Links of Interest
This section is empty. You can help by adding to it. (October 2020) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (October 2020) |
Reverting
This section is empty. You can help by adding to it. (October 2020) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (October 2020) |
USB Info
This section is empty. You can help by adding to it. (October 2020) |
vlan Info
This section is empty. You can help by adding to it. (October 2020) |
Pictures
This section is empty. You can help by adding to it. (October 2020) |
Notes
This section is empty. You can help by adding to it. (October 2020) |
Hardware Modification
This section is empty. You can help by adding to it. (October 2020) |
See also
This section is empty. You can help by adding to it. (October 2020) |
Categories:
- Amped Wireless
- Embedded system/access point
- Embedded System Realtek
- Embedded System RTL8197D
- Embedded System RTL8367RB
- Manuf Loopcomm
- Embedded System RTL8812AR
- Has Mimo Status
- Embedded System IEEE 802.11a/n/ac
- Embedded System RTL8192CE
- Embedded System IEEE 802.11b/g/n
- Wireless Embedded System
- Dual-Radio Wireless Embedded System
- Dual-Band
- Realtek
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation