Amped Wireless AP20000G
abgn | |
|---|---|
| High Power Wireless-N 600mW Gigabit Dual Band Access Point | |
|
| |
| Homepage | |
| WikiDevi.wi-cat.ru | |
| Platform | |
| Brand • Model • Rev |
Amped Wireless AP20000G |
| FCC ID | |
| IC ID | |
| Type |
wireless router |
| Wireless class |
AN600 |
| CPU1 |
Realtek RTL8198 |
| CPU1 Speed |
620 MHz |
| Flash1 Chip |
Macronix MX25L6406EM2I-12G |
| Flash1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
SK hynix H5PS5162GFR-S6C |
| ETH chip1 |
Realtek RTL8198 |
| Switch |
Realtek RTL8198 |
| Ethernet Port Count |
1-WAN 4-1GbE-LAN |
| Stock bootloader |
rtkload |
| Stock FW OS |
Linux |
| Expansion IF types |
USB 2.0 |
| USB ports |
1 |
| USB Hub Compatible |
Untested |
| Power |
12 VDC, 1 A |
| Connector type |
barrel |
| Serial Port (UART) |
yes, (38400,8,N,1) |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
192.168.80.240 |
| Default login user |
admin |
| Default login password |
admin |
| Default SSID |
Amped_AP_2.4GHz, Amped_AP_5.0GHz |
| Manuf/OEM/ODM | |
| Retail | |
| FCC approval date | 11 September 2012 |
| (Est.) release date | 15 September 2012 |
| UPC |
850214003423 (UPC DB, On eBay) |
| ASIN |
B008WJ6ISY |
| Country of manuf | Taiwan |
| Radio 1 | |
| Chip1 |
Realtek RTL8192DR |
| Wireless interface OUI |
F8:7B:8C |
| Antenna Connector Type |
RP-SMA |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11a/n |
| 802.11n |
up to 300 Mbps |
| 802.11a |
up to 54 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
| Radio 2 | |
| Chip1 |
Realtek RTL8192CE |
| Wireless interface OUI |
F8:7B:8C |
| Antenna Connector Type |
RP-SMA |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
Overview
"LOO0070 REV: 1.3" is silkscreened on the board.
- The board is using all Tocon capacitors.
The device uses 2x Skyworks (SiGe) SE5004L / 5004L power amplifiers for the 5GHz radio and 2x Skyworks (SiGe) SE2576L / 2576L power amplifiers for the 2.4GHz radio.
Links of Interest
This section is empty. You can help by adding to it. (October 2020) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (October 2020) |
Reverting
This section is empty. You can help by adding to it. (October 2020) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (October 2020) |
Device recovery
If the device has been misflashed and is unable to boot, recovery (without serial) should be manageable by switching the device into recovery mode (hold 'reset' button while connecting power until LAN ports stay solid blue). The device is then flashable via TFTP @ 192.168.1.6.
Firmware would seem to be accepted in the standard Realtek format.
- You will need to split the vendor's firmware into the three constituent files (using binwalk would be highly recommended).. and then likely upload in the following order..
- the webpages bin (unk. name, don't care enough to find out now)
- root.bin
- linux.bin
Additionally, the firmware of other devices sharing the same board (i.e. the SR20000G and R20000G) appears to be easily flashable using this method (functionallity was not tested aside from noting successful boot and persistence of previous AP mode settings).
See conjur's post on the Realtek thread on the DD-WRT Forum and, presumably, the RTK SDK code and documentation for more details.
USB Info
This section is empty. You can help by adding to it. (October 2020) |
vlan Info
This section is empty. You can help by adding to it. (October 2020) |
Pictures
This section is empty. You can help by adding to it. (October 2020) |
Notes
This section is empty. You can help by adding to it. (October 2020) |
Hardware Modification
This section is empty. You can help by adding to it. (October 2020) |
See also
This section is empty. You can help by adding to it. (October 2020) |
- Amped Wireless
- Embedded system/wireless router
- Embedded System Realtek
- Embedded System RTL8198
- Manuf Loopcomm
- Embedded System RTL8192DR
- Has Mimo Status
- Embedded System IEEE 802.11a/n
- Embedded System RTL8192CE
- Embedded System IEEE 802.11b/g/n
- Wireless Embedded System
- Dual-Radio Wireless Embedded System
- Dual-Band
- Realtek
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation