Amped Wireless AP1200EX
From TechInfoDepot
Jump to navigationJump to searchabgn+ac | |||||
|---|---|---|---|---|---|
| High Power AC1200 Pro Wi-Fi Access Point | |||||
|
| |||||
| WikiDevi.wi-cat.ru | |||||
| Platform | |||||
| Brand • Model • Rev |
Amped Wireless AP1200EX | ||||
| FCC ID | |||||
| IC ID | |||||
| Type |
access point | ||||
| Wireless class |
AC1200 | ||||
| CPU1 |
Brand? Model? | ||||
| Flash1 Chip |
Brand? Model? | ||||
| Flash1 Size |
? MiB | ||||
| RAM1 Size |
? MiB | ||||
| RAM1 Chip |
Brand? Model? | ||||
| ETH chip1 |
Brand? Model? | ||||
| Ethernet Port Count |
2-1GbE-LAN | ||||
|
802dot11 OUI: none specified | |||||
| Expansion IF types |
none specified | ||||
| PoE |
non-standard (otherwise unspecified) | ||||
| Power |
? VDC, ? A | ||||
| Flags |
hg directional | ||||
| Categorized as |
not categorized | ||||
| Other | |||||
| Default IP address |
192.168.80.240 | ||||
| Default SSID |
Amped_AP1200EX_2.4, Amped_AP1200EX_5.0 | ||||
| Retail | |||||
| FCC approval date | 28 August 2018 | ||||
| Country of manuf | Taiwan | ||||
| Radio 1 | |||||
| Chip1 |
brand? model? | ||||
| Wireless interface OUI |
none specified | ||||
| Antenna Connector Type |
none specified | ||||
| MIMO status |
2x2:2 | ||||
| Wireless Standard |
IEEE 802.11b/g/n | ||||
| 802.11n |
up to 300 Mbps | ||||
| 802.11g |
up to 54 Mbps | ||||
| 802.11b |
up to 11 Mbps | ||||
| WiFi Operating Frequency |
2.4 GHz | ||||
| Radio 2 | |||||
| Chip1 |
brand? model? | ||||
| Wireless interface OUI |
none specified | ||||
| Antenna Connector Type |
none specified | ||||
| MIMO status |
2x2:2 | ||||
| Wireless Standard |
IEEE 802.11a/n/ac | ||||
| 802.11ac |
up to 867 Mbps | ||||
| 802.11n |
up to 300 Mbps | ||||
| 802.11a |
up to 54 Mbps | ||||
| WiFi Operating Frequency |
5 GHz | ||||
| |||||
Overview
The supported transmission rates listed in the Test Report NII document at the FCC (1300 Mbps 802.11ac, 450 Mbps 802.11n) suggest that this device supports three spatial streams on the 5GHz radio despite being labeled as AC1200 which typically means two spatial streams. The same document lists two antennas which likely means that this is actually a two-stream device and the listed transmission rates are wrong.
- Web GUI: http://setup.ampedwireless.com
Possibly Realtek based?
Links of Interest
This section is empty. You can help by adding to it. (October 2020) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (October 2020) |
Reverting
This section is empty. You can help by adding to it. (October 2020) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (October 2020) |
USB Info
This section is empty. You can help by adding to it. (October 2020) |
vlan Info
This section is empty. You can help by adding to it. (October 2020) |
Pictures
This section is empty. You can help by adding to it. (October 2020) |
Notes
This section is empty. You can help by adding to it. (October 2020) |
Hardware Modification
This section is empty. You can help by adding to it. (October 2020) |
See also
This section is empty. You can help by adding to it. (October 2020) |