AeroScout EX5100 Exciter
bg | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RFID scanner | |||||||||||||
| WikiDevi.wi-cat.ru | |||||||||||||
| Platform | |||||||||||||
| Brand • Model • Rev |
AeroScout Exciter EX 5100 | ||||||||||||
| FCC ID | |||||||||||||
| IC ID | |||||||||||||
| Type |
RFID scanner | ||||||||||||
| Wireless class |
G54 | ||||||||||||
| CPU1 |
Freescale MCF52258 | ||||||||||||
| Flash1 Chip |
Brand? Model? | ||||||||||||
| Flash1 Size |
? MiB | ||||||||||||
| RAM1 Size |
? MiB | ||||||||||||
| RAM1 Chip |
Brand? Model? | ||||||||||||
| ETH chip1 |
Brand? Model? | ||||||||||||
| Ethernet Port Count |
1-100MbE-LAN | ||||||||||||
| Expansion IF types |
none specified | ||||||||||||
| PoE |
802.3af, standard | ||||||||||||
| Power |
48 VDC, 0.5 A | ||||||||||||
| Categorized as |
not categorized | ||||||||||||
| Other | |||||||||||||
| Default IP address |
192.168.1.178 | ||||||||||||
| Retail | |||||||||||||
| FCC approval date | 08 March 2013 | ||||||||||||
| Radio 1 | |||||||||||||
| Chip1 |
G2 Microsystems G2C547 | ||||||||||||
| Wireless interface OUI |
none specified | ||||||||||||
| Antenna Connector Type |
none specified | ||||||||||||
| Wireless Standard |
IEEE 802.11b/g | ||||||||||||
| 802.11g |
up to 54 Mbps | ||||||||||||
| 802.11b |
up to 11 Mbps | ||||||||||||
| WiFi Operating Frequency |
2.4 GHz | ||||||||||||
| |||||||||||||
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
For a list of all currently documented G2 Microsystems chipsets with specifications, see G2 Microsystems.
Overview
"AeroScout", "EX-5000", "200-2104-1000", "AD6232T1 41/11" is silkscreened on the top (and bottom) of the main board in the FCC photos.
- "TAG-3500", "20020475000", "AeroScout", and "AD5462T5 44/10" is silkscreened on the G2 WiFi module.
The G2 WiFi module is using a G2 Microsystems G2C547 (G2C547-1) SoC for low power WiFi capability.
- There appears to be an additional Freescale microcontroller on the board.
The additional RF module is using a Freescale M9S / M9S8GT6ACE (M9S8GT6A, CE 4L11Y, CTAX1032) microcontroller and a Xilinx XC9572XL CPLD.
The microcontroller used in this device appears to be a MCF52258 (Coldfire).
Per the FCC manual, the AeroScout EX5100 includes the following components...
- Bidirectional Wi-Fi module with only the receiver enabled
- Wi-Fi transmitter (T2 Tag) which is used by the Exciter for health management
- Exciter controller
- 125 KHz LF Tx
The OUI specified on the FCC label is 00:0C:CC (AeroScout). This is assumed to be correct.
- The sample FCC label also has "Stanley Healthcare Solutions" on it.
- Likely P/N: 100-2105-1000
Manuf. in Israel?
Links of Interest
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (July 2020) |
Reverting
This section is empty. You can help by adding to it. (July 2020) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (July 2020) |
USB Info
This section is empty. You can help by adding to it. (July 2020) |
vlan Info
This section is empty. You can help by adding to it. (July 2020) |
Pictures
This section is empty. You can help by adding to it. (July 2020) |
Notes
This section is empty. You can help by adding to it. (July 2020) |
Hardware Modification
This section is empty. You can help by adding to it. (July 2020) |
See also
This section is empty. You can help by adding to it. (July 2020) |
- AeroScout
- Embedded system/RFID scanner
- Embedded System Freescale
- Embedded System MCF52258
- Embedded System G2 Microsystems
- Embedded System G2C547
- Embedded System IEEE 802.11b/g
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Freescale
- G2 Microsystems
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation