Actiontec R4500U
From TechInfoDepot
Revision as of 01:07, 9 September 2022 by ShadowBot (talk | contribs) (→top: clean up, replaced: 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, |802dot11_protocols =none → |802dot11_protocols = none)
|
USB/Ethernet Home DSL Modem (with Routing Capabilities) | |
| Homepage | |
|---|---|
| WikiDevi.wi-cat.ru | |
| Platform | |
| Brand • Model • Rev |
Actiontec R4500U |
| Type |
dsl modem |
| CPU1 |
Virata VC45100 |
| CPU2 |
Globespan GS7070-174 |
| Flash1 Chip |
SST SST39VF016-70-4C-EI |
| Flash1 Size |
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> |
| RAM1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> |
| RAM1 Chip |
Nanya NT5SV4M16DT-7 |
| ETH chip1 |
Virata VC45100 |
| Ethernet Port Count |
1-100MbE-LAN |
| Expansion IF types |
none specified |
| Power |
12 VDC, 1.2 A |
| Connector type |
barrel |
| Flags |
ADSL |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
???.???.???.??? |
| Retail | |
| (Est.) release date | 2002 |
| Country of manuf | Taiwan |
For a list of all currently documented GlobespanVirata chipsets with specifications, see GlobespanVirata.
For a list of all currently documented GlobespanVirata chipsets with specifications, see GlobespanVirata.
Overview
"ACTIONTEC", "04404A", and "47-0045-2SA3" is silkscreened on the board populating this entry.
The two large radial capacitors in the power section appear to be Chemi-Con caps. Capacitors on the rest of the board are (at least) a mix of GEMCON, Y.J., and Fullcon caps.
The device uses Globespan GS7070 and GT3180 chips for the ADSL modem.
- The Ethernet transformer is a Mag.Com PX-5111S.
The power adapter included with the unit may be an OEM AD-121AG (120VAC ~ 60Hz, 18W -> 12VDC, 1A). The modem's label specifies that it uses a 12V 1.2A PSU, however..
Links of Interest
This section is empty. You can help by adding to it. (February 2020) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (February 2020) |
Reverting
This section is empty. You can help by adding to it. (February 2020) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (February 2020) |
USB Info
This section is empty. You can help by adding to it. (February 2020) |
vlan Info
This section is empty. You can help by adding to it. (February 2020) |
Pictures
This section is empty. You can help by adding to it. (February 2020) |
Notes
This section is empty. You can help by adding to it. (February 2020) |
Hardware Modification
This section is empty. You can help by adding to it. (February 2020) |
See also
This section is empty. You can help by adding to it. (February 2020) |