Actiontec PK5001A
From TechInfoDepot
Jump to navigationJump to search
bgn | |
|---|---|
|
Wireless N ADSL2 Modem/Router Wireless 11n ADSL2+ Modem Gateway | |
| Platform | |
| Brand • Model • Rev |
Actiontec PK5001A |
| FCC ID | |
| IC ID | |
| Type |
wireless router, dsl modem |
| Wireless class |
N300 |
| CPU1 |
Lantiq PSB 50810 |
| Flash1 Chip |
ESMT F59L1G81A-25T |
| Flash1 Size |
128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
ESMT W13S5121632A-5T |
| ETH chip1 |
Lantiq PSB 50810 |
| Switch |
Lantiq PSB 6970 |
| Ethernet Port Count |
4-100MbE-LAN |
| Stock bootloader |
U-Boot 2010.06 Lantiq;v-2.2.6-aei-dirty |
| Stock FW OS |
Linux 2.6.32.42 OpenWrt Backfire |
| Expansion IF types |
none specified |
| Power |
12 VDC, 1 A |
| Connector type |
barrel |
| Flags |
ADSL2+ |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
192.168.0.1 |
| Default login user |
admin |
| Default login password |
randomly generated |
| Default SSID |
CenturyLinkXXXX |
| Retail | |
| FCC approval date | 05 May 2012 |
| Country of manuf | China |
| Radio 1 | |
| Chip1 |
Lantiq PSB 8221 |
| Chip2 |
Lantiq PSB 8304 |
| Wireless interface OUI |
A0:A3:E2 |
| Antenna Connector Type |
U.FL |
| MIMO status |
2x2:2 |
| Wireless Standard |
IEEE 802.11b/g/n |
| 802.11n |
up to 300 Mbps |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Lantiq (Intel) chipsets with specifications, see Lantiq.
Overview
"Actiontec" and "06703B." is silkscreened on the board in the FCC photos.
RAM specs are per the FCC photos.. but the FCC photos also show
- the device with a 128MB SK hynix H27U1G8F2BTR-BC Flash.
Actiontec's page for the PK5001A states uses 64MB Flash.
- CPU: Lantiq PSB 50810 - XWAY ARX168 (PSB 50810 EL)
The wireless chipset is Lantiq WAVE300 based.
- Lantiq PSB 8221 - XWAY WAVE300 (PSB 8221EL V1.1)
- Lantiq PSB 8304 - XWAY WAVE300 (PSB 8304 V1.1)
The FE Switch appears to be a TANTOS.
- Lantiq PSB 6970 - XWAY TANTOS (PSB 6970 HL V1.3)
Possible 40:8B:07 OUI (on a label including the device MAC
- affixed to the board in the FCC internal photos)...
Links of Interest
This section is empty. You can help by adding to it. (February 2020) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (February 2020) |
Reverting
This section is empty. You can help by adding to it. (February 2020) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (February 2020) |
USB Info
This section is empty. You can help by adding to it. (February 2020) |
vlan Info
This section is empty. You can help by adding to it. (February 2020) |
Pictures
This section is empty. You can help by adding to it. (February 2020) |
Notes
This section is empty. You can help by adding to it. (February 2020) |
Hardware Modification
This section is empty. You can help by adding to it. (February 2020) |
See also
This section is empty. You can help by adding to it. (February 2020) |
Categories:
- Actiontec
- Embedded system/wireless router
- Embedded system/dsl modem
- Embedded System Lantiq
- Embedded System PSB 50810
- Embedded System PSB 6970
- Embedded System PSB 8221
- Embedded System PSB 8304
- Has Mimo Status
- Embedded System IEEE 802.11b/g/n
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Lantiq
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation