Actiontec PK5000 (Qwest)
From TechInfoDepot
Jump to navigationJump to searchbg | |
|---|---|
| wireless router,dsl modem | |
| Homepage | |
| Platform | |
| Brand • Model • Rev |
Actiontec PK5000 (Qwest) |
| FCC ID | |
| Type |
wireless router, dsl modem |
| Wireless class |
G54 |
| CPU1 |
Infineon PSB7200ZDW |
| CPU1 Speed |
212 MHz |
| Flash1 Chip |
Spansion S29GL256P90TFCR1 |
| Flash1 Size |
32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> |
| RAM1 Size |
64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> |
| RAM1 Chip |
Winbond W9825G6EH-6 x 2 |
| ETH chip1 |
Infineon PSB7200ZDW |
| Switch |
Marvell 88E6060 |
| Ethernet Port Count |
4-100MbE-LAN |
| Stock bootloader |
PSPBoot 3.6.7.16 |
| Stock FW OS |
Linux 2.4.17 mvl21-malta-mips fp le;MontaVista |
| Expansion IF types |
none specified |
| Power |
12 VDC, 1 A |
| Connector type |
barrel |
| Serial Port (UART) |
yes, 6-pin header, populated, 3.3V TTL, (38400,8,N,1) |
| Flags |
ADSL2+ |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
192.168.0.1 |
| Default login user |
admin |
| Default login password |
Leave blank |
| Default SSID |
myqwestXXXX |
| Retail | |
| FCC approval date | 19 December 2008 |
| (Est.) release date | 2009 |
| UPC |
789286807731 (UPC DB, On eBay) |
| ASIN |
B002IVVBDE |
| Country of manuf | China |
| Radio 1 | |
| Chip1 |
Infineon PSB1350AZGU |
| Chip2 |
Infineon PSB3422 |
| Wireless interface OUI |
00:24:7B |
| Antenna Connector Type |
RP-SMA |
| Wireless Standard |
IEEE 802.11b/g |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Infineon (Lantiq) chipsets with specifications, see Infineon.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
Overview
"Actiontec" and "06182A" is silkscreened on the board in the FCC photos.
- This device uses Infineon branded Texas Instruments chips.
- TNETD7200 & TNETW1350A
Links of Interest
This section is empty. You can help by adding to it. (February 2020) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (February 2020) |
Reverting
This section is empty. You can help by adding to it. (February 2020) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (February 2020) |
USB Info
This section is empty. You can help by adding to it. (February 2020) |
vlan Info
This section is empty. You can help by adding to it. (February 2020) |
Pictures
Notes
This section is empty. You can help by adding to it. (February 2020) |
Hardware Modification
This section is empty. You can help by adding to it. (February 2020) |
See also
This section is empty. You can help by adding to it. (February 2020) |
Categories:
- Actiontec
- Embedded system/wireless router
- Embedded system/dsl modem
- Embedded System Infineon
- Embedded System PSB7200ZDW
- Embedded System Marvell
- Embedded System 88E6060
- Embedded System PSB1350AZGU
- Embedded System PSB3422
- Embedded System IEEE 802.11b/g
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Infineon
- Marvell
- Embedded System
- User Photo's Needed
- FCC Photo's Needed
- English Documentation