Actiontec 802AI
From TechInfoDepot
Revision as of 16:06, 5 September 2022 by ShadowBot (talk | contribs) (→top: clean up, replaced: 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, |802dot11_protocols =b → |802dot11_protocols = b)
b | |
|---|---|
| 11 Mbps Wireless Access Point | |
| Support | |
| Platform | |
| Brand • Model • Rev |
Actiontec 802AI |
| FCC ID | |
| Type |
access point |
| Wireless class |
B11 |
| CPU1 |
No Wires Needed Poldhu |
| Flash1 Chip |
Atmel AT49BV1614-12TC |
| Flash1 Size |
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> |
| RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Chip |
Samsung K4S641632H-TC75 |
| ETH chip1 |
No Wires Needed Poldhu |
| ETH chip2 |
Lucent LU3X31T |
| Ethernet Port Count |
1-100MbE-LAN |
|
802dot11 OUI: none specified | |
| Expansion IF types |
none specified |
| Power |
5 VDC, 2.5 A |
| Connector type |
barrel |
| Flags |
schematics, block diagram |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
???.???.???.??? |
| Retail | |
| FCC approval date | 07 December 2001 |
| Radio 1 | |
| Chip1 |
No Wires Needed Poldhu |
| Chip2 |
Intersil HFA3863 |
| Chip3 |
Intersil HFA3683A |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| Wireless Standard |
IEEE 802.11b |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented Lucent (Agere) chipsets with specifications, see Lucent.
For a list of all currently documented No Wires Needed (NWN) chipsets with specifications, see No Wires Needed.
Overview
Actiontec's FCC docs reference the Poldhu chip as a ISL3865CK.
"ACTIONTEC", "47-0045-28AF", and "802AI Rev. 1A" is silkscreened on the board in the FCC photos.
The manual shows a sample SSID of default and a MAC with a 00:20:E0 (Actiontec) OUI.
Links of Interest
This section is empty. You can help by adding to it. (February 2020) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (February 2020) |
Reverting
This section is empty. You can help by adding to it. (February 2020) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (February 2020) |
USB Info
This section is empty. You can help by adding to it. (February 2020) |
vlan Info
This section is empty. You can help by adding to it. (February 2020) |
Pictures
This section is empty. You can help by adding to it. (February 2020) |
Notes
This section is empty. You can help by adding to it. (February 2020) |
Hardware Modification
This section is empty. You can help by adding to it. (February 2020) |
See also
This section is empty. You can help by adding to it. (February 2020) |
Categories:
- Actiontec
- Embedded system/access point
- Embedded System No Wires Needed
- Embedded System Poldhu
- Embedded System Lucent
- Embedded System LU3X31T
- Embedded System Intersil
- Embedded System HFA3863
- Embedded System HFA3683A
- Embedded System IEEE 802.11b
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- No Wires Needed
- Lucent
- Intersil
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation