Accton WG3005D
From TechInfoDepot
Revision as of 11:56, 28 October 2022 by ShadowBot (talk | contribs) (→Hardware Modification: clean up, replaced: {{DoNotRemove}} → {{DoNotRemove|migration}}, 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols)
b (B11) | |||||
|---|---|---|---|---|---|
| wireless router | |||||
| Platform | |||||
| Brand • Model • Rev |
Accton WG3005D | ||||
| FCC ID | |||||
| IC ID | |||||
| Type |
wireless router | ||||
| CPU1 |
ADMtek ADM8628 | ||||
| CPU1 Speed |
75 MHz | ||||
| Flash1 Chip |
Brand? Model? | ||||
| Flash1 Size |
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> | ||||
| RAM1 Size |
8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> | ||||
| RAM1 Chip |
Brand? Model? | ||||
| ETH chip1 |
ADMtek ADM8628 | ||||
| Switch |
ADMtek ADM6996 | ||||
| Ethernet Port Count |
1-WAN 4-100MbE-LAN | ||||
|
802dot11 OUI: none specified | |||||
| Expansion IF types |
none specified | ||||
| Power |
9 VDC, 1 A | ||||
| Connector type |
barrel 5.5 mm (OD) 2.1 mm (ID) 9 mm (LEN) | ||||
| Other | |||||
|
| |||||
| Manuf/OEM/ODM | |||||
| Retail | |||||
| FCC approval date | 16 May 2003 | ||||
| Radio 1 | |||||
| Chip1 |
ADMtek ADM8628 | ||||
| Chip2 |
RFMD RF2958 | ||||
| Wireless interface OUI |
none specified | ||||
| Antenna Connector Type |
none specified | ||||
| Wireless Standard |
IEEE 802.11b | ||||
| 802.11b |
up to 11 Mbps | ||||
| WiFi Operating Frequency |
2.4 GHz | ||||
| |||||
For a list of all currently documented ADMtek chipsets with specifications, see ADMtek.
For a list of all currently documented RFMD (Qorvo) chipsets with specifications, see RFMD.
For a list of all currently documented Accton device with specifications, see Accton.
Overview
This device was sold by SMC as the SMC7004VWBR v2. A highly similar device was also sold by Belkin as the Belkin F5D6231-4 v2.
- This device is presumed to also use the RF3000 and RF2958, like the F5D6231-4.
Links of Interest
This section is empty. You can help by adding to it. (January 2020) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (January 2020) |
Reverting
This section is empty. You can help by adding to it. (January 2020) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (January 2020) |
USB Info
This section is empty. You can help by adding to it. (January 2020) |
vlan Info
This section is empty. You can help by adding to it. (January 2020) |
Pictures
This section is empty. You can help by adding to it. (January 2020) |
Notes
This section is empty. You can help by adding to it. (January 2020) |
Hardware Modification
This section is empty. You can help by adding to it. (January 2020) |
See also
This section is empty. You can help by adding to it. (January 2020) |
Categories:
- Accton
- Embedded system/wireless router
- Embedded System ADMtek
- Embedded System ADM8628
- Embedded System ADM6996
- Manuf Accton
- Embedded System RFMD
- Embedded System RF2958
- Embedded System IEEE 802.11b
- Single-Radio Wireless Embedded System
- Wireless Embedded System
- ADMtek
- RFMD
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation