AboCom WP102
From TechInfoDepot
Revision as of 16:04, 5 September 2022 by ShadowBot (talk | contribs) (→top: clean up, replaced: 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, |802dot11_protocols =b → |802dot11_protocols = b)
b | |
|---|---|
| 11Mbps 802.11b Wireless Access Point | |
| Platform | |
| Brand • Model • Rev |
AboCom WP102 |
| FCC ID | |
| Type |
access point |
| Wireless class |
B11 |
| CPU1 |
Realtek RTL8181 |
| Flash1 Chip |
Macronix MX29LV160ABTC-90 |
| Flash1 Size |
2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> |
| RAM1 Size |
16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> |
| RAM1 Chip |
EtronTech EM638165TS-7 x 2 |
| ETH chip1 |
Realtek RTL8181 |
| Switch |
Realtek RTL8305SB |
| Ethernet Port Count |
2-100MbE-LAN |
| Expansion IF types |
none specified |
| Power |
9 VDC, 0.7 A |
| Connector type |
barrel |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
192.168.100.252 |
| Default SSID |
802.11b-SSID |
| Manuf/OEM/ODM | |
| Retail | |
| Availability | End of Life |
| FCC approval date | 18 November 2003 |
| Country of manuf | Taiwan |
| Radio 1 | |
| Chip1 |
Realtek RTL8181 |
| Chip2 |
Philips SA2400A |
| Wireless interface OUI |
00:E0:98 |
| Antenna Connector Type |
RP-SMA |
| Wireless Standard |
IEEE 802.11b |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Philips chipsets with specifications, see Philips.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
Overview
The board is probably silkscreened with "M01-WP102-X20" or something similar in the FCC photos.
Per the manual, the default SSID is 802.11b-SSID.
Links of Interest
- List of known Linux on Realtek RTL8181-based consumer devices
- Downloads
- On the known RTL8181-based consumer devices list at rtl8181.sourceforge.net
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (November 2019) |
Reverting
This section is empty. You can help by adding to it. (November 2019) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (November 2019) |
USB Info
This section is empty. You can help by adding to it. (November 2019) |
vlan Info
This section is empty. You can help by adding to it. (November 2019) |
Pictures
This section is empty. You can help by adding to it. (November 2019) |
Notes
This section is empty. You can help by adding to it. (November 2019) |
Hardware Modification
This section is empty. You can help by adding to it. (November 2019) |
See also
This section is empty. You can help by adding to it. (November 2019) |
Categories:
- AboCom
- Embedded system/access point
- Embedded System Realtek
- Embedded System RTL8181
- Embedded System RTL8305SB
- Manuf AboCom
- Embedded System Philips
- Embedded System SA2400A
- Embedded System IEEE 802.11b
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Realtek
- Philips
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation