AboCom SWB500
From TechInfoDepot
Revision as of 16:04, 5 September 2022 by ShadowBot (talk | contribs) (→top: clean up, replaced: 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, 802dot11_prot → 802dot11_protocols, 802dot11_protocolsocols → 802dot11_protocols, |802dot11_protocols =b → |802dot11_protocols = b)
b | |
|---|---|
| access point | |
| Platform | |
| Brand • Model • Rev |
AboCom SWB500 |
| FCC ID | |
| Type |
access point |
| Wireless class |
B11 |
| CPU1 |
Atmel AT76C510 |
| Flash1 Chip |
Atmel AT29LV040A-20TC |
| Flash1 Size |
0.5 MiB524,288 B <br />4,096 Kib <br />512 KiB <br />4 Mib <br />4.882812e-4 GiB <br /> |
| RAM1 Size |
0.5 MiB524,288 B <br />4,096 Kib <br />512 KiB <br />4 Mib <br />4.882812e-4 GiB <br /> |
| RAM1 Chip |
ICSI IS61LV5128-12T |
| ETH chip1 |
Atmel AT76C510 |
| Switch |
Kendin KS8995E |
| Ethernet Port Count |
4-100MbE-LAN |
|
802dot11 OUI: none specified | |
| Expansion IF types |
none specified |
| Power |
5 VDC, 2.4 A |
| Connector type |
barrel |
| Flags |
schematics |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
???.???.???.??? |
| Default login user |
Leave blank |
| Default login password |
public |
| Retail | |
| FCC approval date | 19 February 2002 |
| Country of manuf | Taiwan |
| Radio 1 | |
| Chip1 |
Atmel AT76C510 |
| Chip2 |
Intersil HFA3861B |
| Chip3 |
Intersil HFA3683A |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| Wireless Standard |
IEEE 802.11b |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Atmel chipsets with specifications, see Atmel.
For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented Micrel (Kendin) chipsets with specifications, see Micrel.
Overview
"M01-SW500-X10" is silkscreened on the board in the FCC photos.
- The RF module is from Kai-Link.
Additional specifications, per the FCC manual, follow...
- Dimensions (LxWxH): 160 mm x 105 mm x 27 mm
- Weight: 250 g
This device is meant to be controlled with AboCom's utility.
- The default password to access the device is public.
Links of Interest
This section is empty. You can help by adding to it. (November 2019) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (November 2019) |
Reverting
This section is empty. You can help by adding to it. (November 2019) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (November 2019) |
USB Info
This section is empty. You can help by adding to it. (November 2019) |
vlan Info
This section is empty. You can help by adding to it. (November 2019) |
Pictures
This section is empty. You can help by adding to it. (November 2019) |
Notes
This section is empty. You can help by adding to it. (November 2019) |
Hardware Modification
This section is empty. You can help by adding to it. (November 2019) |
See Also
This section is empty. You can help by adding to it. (November 2019) |
Categories:
- AboCom
- Embedded system/access point
- Embedded System Atmel
- Embedded System AT76C510
- Embedded System Kendin
- Embedded System KS8995E
- Embedded System Intersil
- Embedded System HFA3861B
- Embedded System HFA3683A
- Embedded System IEEE 802.11b
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Atmel
- Kendin
- Intersil
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation