AMIT WIP-301
b | |
|---|---|
| wireless router | |
| WikiDevi.wi-cat.ru | |
| Platform | |
| Brand • Model • Rev |
AMIT WIP-301 |
| FCC ID | |
| Type |
wireless router |
| Wireless class |
B11 |
| CPU1 |
AMD Am186 |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
? MiB |
| RAM1 Size |
? MiB |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 |
Realtek RTL8019AS |
| ETH chip2 |
Realtek RTL8019AS |
| Switch |
Kendin KS8995 |
| Ethernet Port Count |
1-WAN 4-100MbE-LAN |
|
802dot11 OUI: none specified | |
| Expansion IF types |
Parallel |
| Paralell Ports |
1 |
| Power |
5 VDC, 3 A |
| Connector type |
barrel |
| Serial Port (UART) |
DE-9 |
| Flags |
schematics, block diagram |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
192.168.123.254 |
| Default login user |
Leave blank |
| Default login password |
admin |
| Manuf/OEM/ODM | |
| Retail | |
| FCC approval date | 14 December 2000 |
| Country of manuf | Taiwan |
| Radio 1 | |
| Radio1 module | |
| Radio1 module IF |
unknown |
| Chip1 |
No Wires Needed Poldhu |
| Chip2 |
Intersil HFA3861 |
| Chip3 |
Intersil HFA3683A |
| Wireless interface OUI |
none specified |
| Antenna Connector Type |
none specified |
| Wireless Standard |
IEEE 802.11b |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented AMD chipsets with specifications, see AMD.
For a list of all currently documented Intersil chipsets with specifications, see Intersil.
For a list of all currently documented Micrel (Kendin) chipsets with specifications, see Micrel.
For a list of all currently documented No Wires Needed (NWN) chipsets with specifications, see No Wires Needed.
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
Overview
"34-WIP301-3B VER B" (or something like that) is silkscreened on the mainboard in the FCC photos.
LAN and WAN interfaces for the router are both 10Mbit. The switch is, however, 10/100 Mbit capable.
This device is assumed to use NWN's Poldhu chip.
Default settings (including the SSID) are per the FCC manual.
The power supply shown in the FCC photos is a SILICORE SWF-5 Rev 1.0a (90-264VAC ~ 50/60Hz -> 5VDC, 3A).
Links of Interest
This section is empty. You can help by adding to it. (October 2020) |
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (October 2020) |
Reverting
This section is empty. You can help by adding to it. (October 2020) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (October 2020) |
USB Info
This section is empty. You can help by adding to it. (October 2020) |
vlan Info
This section is empty. You can help by adding to it. (October 2020) |
Pictures
This section is empty. You can help by adding to it. (October 2020) |
Notes
This section is empty. You can help by adding to it. (October 2020) |
Hardware Modification
This section is empty. You can help by adding to it. (October 2020) |
See also
This section is empty. You can help by adding to it. (October 2020) |
- AMIT
- Embedded system/wireless router
- Embedded System AMD
- Embedded System Am186
- Embedded System Realtek
- Embedded System RTL8019AS
- Embedded System Kendin
- Embedded System KS8995
- Manuf AMIT
- Embedded System No Wires Needed
- Embedded System Poldhu
- Embedded System Intersil
- Embedded System HFA3861
- Embedded System HFA3683A
- Embedded System IEEE 802.11b
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- AMD
- Realtek
- Kendin
- No Wires Needed
- Intersil
- Embedded System
- Retail Photo's Needed
- User Photo's Needed
- FCC Photo's Needed
- English Documentation