ADT iHub (iHUB-3001B-ADT)
From TechInfoDepot
bg | |
|---|---|
| home automation controller | |
| Platform | |
| Brand • Model • Rev |
ADT iHub |
| Model Part Number |
iHUB-3001B-ADT |
| FCC ID | |
| IC ID | |
| Type |
home automation controller |
| Wireless class |
G54 |
| CPU1 | |
| Flash1 Chip |
Brand? Model? |
| Flash1 Size |
? MiB |
| RAM1 Size |
? MiB |
| RAM1 Chip |
Brand? Model? |
| ETH chip1 | |
| Ethernet Port Count |
1-WAN 1-100MbE-LAN |
| Expansion IF types |
USB 2.0 |
| USB ports |
2 |
| USB Hub Compatible |
Untested |
| Power |
12 VDC, 1 A |
| Connector type |
barrel |
| Flags |
Z-Wave |
| Categorized as |
not categorized |
| Other | |
| Default IP address |
???.???.???.??? |
| Default SSID |
iHub_XXXXXXXXXXXX |
| Manuf/OEM/ODM | |
| Retail | |
| FCC approval date | 07 June 2012 |
| Country of manuf | Taiwan |
| Radio 1 | |
| Chip1 | |
| Wireless interface OUI |
00:0E:8F,00:C0:02 |
| Antenna Connector Type |
U.FL, RP-SMA |
| Wireless Standard |
IEEE 802.11b/g |
| 802.11g |
up to 54 Mbps |
| 802.11b |
up to 11 Mbps |
| WiFi Operating Frequency |
2.4 GHz |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Overview
This device has a FCC grantee code of iControl Networks.
OEM SerComm (YUC00A-1.6), model NA801-B?
The FCC manual says the device has 32MB RAM and 32MB Flash (NOR).
The OUI on the FCC EUT is 00:C0:02 (SerComm).
- Per WiGLE data, the default SSID of the device seems to be iHub_XXXXXXXXXXXX, where XXXXXXXXXXXX is the serial number (w/ lower case letters). The S/Ns seem to start with 006035. Additionally, a 00:0E:8F (SerComm) OUI is also used with this pattern - it is presumed to also be used with this device.