3Com 3CRWDR101B-75 (WL-552)
From TechInfoDepot
Jump to navigationJump to searchbg | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 3Com OfficeConnect ADSL Wireless 54Mbps 11g Firewall Router | |||||||||
| Wikipedia | |||||||||
| WikiDevi.wi-cat.ru | |||||||||
| Platform | |||||||||
| Brand • Model • Rev |
3Com 3CRWDR101B-75 | ||||||||
| FCC ID | |||||||||
| Type |
wireless router, dsl modem | ||||||||
| Wireless class |
G54 | ||||||||
| CPU1 |
Texas Instruments Model? | ||||||||
| Flash1 Chip |
Brand? Model? | ||||||||
| Flash1 Size |
? MiB | ||||||||
| RAM1 Size |
? MiB | ||||||||
| RAM1 Chip |
PSC Model? | ||||||||
| ETH chip1 |
Texas Instruments Model? | ||||||||
| Switch |
IC+ IP175C | ||||||||
| Ethernet Port Count |
4-100MbE-LAN | ||||||||
|
802dot11 OUI: none specified | |||||||||
| Expansion IF types |
Mini PCI | ||||||||
| Mini PCI slots |
1 | ||||||||
| Power |
12 VDC, 1 A | ||||||||
| Connector type |
barrel | ||||||||
| Flags |
ADSL2+ | ||||||||
| Categorized as |
not categorized | ||||||||
| Other | |||||||||
| Default IP address |
192.168.1.1 | ||||||||
| Default login user |
Leave blank | ||||||||
| Default login password |
admin | ||||||||
| Default SSID |
3Com | ||||||||
| Manuf/OEM/ODM |
Arcadyan AR4505NW | ||||||||
| Retail | |||||||||
| FCC approval date | 11 April 2006 | ||||||||
| Radio 1 | |||||||||
| Radio1 module | |||||||||
| Radio1 module IF |
Mini PCI | ||||||||
| Chip1 |
Texas Instruments TNETW1350A | ||||||||
| Chip2 |
Texas Instruments TNETW3422 | ||||||||
| Wireless interface OUI |
none specified | ||||||||
| Antenna Connector Type |
none specified | ||||||||
| Wireless Standard |
IEEE 802.11b/g | ||||||||
| 802.11g |
up to 54 Mbps | ||||||||
| 802.11b |
up to 11 Mbps | ||||||||
| WiFi Operating Frequency |
2.4 GHz | ||||||||
| |||||||||
For a list of all currently documented IC+ chipsets with specifications, see IC+.
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.
Overview
"P/N: 141450520014J REV: 0B" is silkscreened on the board.
Default settings are per the FCC manual.
Links of Interest
Flashing
| NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power. |
Upgrading
This section is empty. You can help by adding to it. (February 2021) |
Reverting
This section is empty. You can help by adding to it. (February 2021) |
JTAG-Serial Info
This section is empty. You can help by adding to it. (February 2021) |
USB Info
This section is empty. You can help by adding to it. (February 2021) |
vlan Info
This section is empty. You can help by adding to it. (February 2021) |
Pictures
Notes
This section is empty. You can help by adding to it. (February 2021) |
Hardware Modification
This section is empty. You can help by adding to it. (February 2021) |
See also
This section is empty. You can help by adding to it. (February 2021) |
Categories:
- 3Com
- Embedded system/wireless router
- Embedded system/dsl modem
- Embedded System Texas Instruments
- Embedded System IC+
- Embedded System IP175C
- Manuf Arcadyan
- Embedded System TNETW1350A
- Embedded System TNETW3422
- Embedded System IEEE 802.11b/g
- Wireless Embedded System
- Single-Radio Wireless Embedded System
- Texas Instruments
- IC+
- Embedded System
- Retail Photo's Needed
- FCC Photo's Needed
- English Documentation